Die Cutter Guide for Fridge Magnet & Badge Businesses India – Which Size Do You Need?
Die Cutter Guide for Fridge Magnet & Badge Businesses in India
A die cutter (also called a circle punch or shape punch) is one of the most important tools in a fridge magnet or badge making business. Without it, you're hand-cutting every design — which is slow, inconsistent, and produces poor-quality output. This guide covers everything you need to know.
What Is a Die Cutter?
A die cutter is a manual press tool with a sharp steel blade shaped to a specific size and format (circle, rectangle, etc.). You place your printed design sheet under the cutter, press down, and it punches a perfectly shaped cut in a single motion. The result: a precisely sized design piece that fits perfectly into your machine's mold.
Why Is a Die Cutter Essential?
Without a die cutter:
- Hand-cutting takes 3–5x longer per unit
- Cuts are inconsistent — designs end up off-center in the finished magnet or badge
- You waste raw material when hand-cut pieces don't fit the mold correctly
- Output quality suffers — off-center designs look unprofessional
With a die cutter, every cut is identical, centered, and correct — in one motion, every time.
Die Cutters Available from ShopShip
50mm Die Cutter (Imported) – ₹5,999
For use with the 50mm x 50mm Fridge Magnet Machine. Imported steel blade — sharper and longer-lasting than domestic alternatives. Recommended for commercial use.
Buy the 50mm Die Cutter →
58mm Die Cutter (Imported) – ₹5,499
For use with the 58mm Circle Badge Machine. Cuts perfect circles for 58mm badges. Imported quality for commercial production.
Buy the 58mm Die Cutter →
90x65mm Die Cutter – ₹9,000
For use with the 90x65mm Fridge Magnet Machine. Cuts precise rectangles for large-format magnets.
Buy the 90x65mm Die Cutter →
36mm Die Cutter (Indian) – ₹3,000
For small keychains and mini badges. Indian-made, cost-effective option for hobbyists and small-scale production.
Buy the 36mm Die Cutter →
Imported vs Indian-Made Die Cutters – Which Is Better?
| Factor | Imported | Indian-Made |
|---|---|---|
| Blade sharpness | Higher (harder steel alloy) | Moderate |
| Blade lifespan | Longer (thousands of cuts) | Shorter |
| Cut quality | Cleaner, burr-free edges | Good for light use |
| Price | Higher | Lower |
| Best for | Commercial production | Hobbyists, low volume |
Recommendation: If you're running a business, always buy the imported die cutter. The better blade quality reduces waste and the longer lifespan makes it cheaper over time.
How to Use a Die Cutter
- Print your designs on photo paper (use Printbot to batch multiple designs on one sheet)
- Place the printed sheet face-up under the die cutter blade
- Align the blade over your design
- Press down firmly with both hands
- Lift — your design is perfectly cut and ready to press
The whole process takes 2–3 seconds per cut once you're practiced.
How Long Does a Die Cutter Blade Last?
A ShopShip imported die cutter is built for thousands of cuts under normal commercial use. If you notice edges becoming ragged or cuts requiring more force, the blade is dulling — time to replace. Contact ShopShip for replacement blades or a new cutter.
Shop all die cutters at shopship.in/collections/fridge-magnet-machines